balance charger

Li-Po/Li-Fe battery charger 1Dual input: AC/DC 2Charge current : Max1.5A 3circuit power: 20W 4OEM/ODM is welcome

Type of battery	Lipo/LiFe/NiCd/MH
Charging current	Max.1.5A
circuit power	20W
Balance tolerance	+/-10mA
Battery cell count	Lipo/LiFe 2-3S NiCd/MH 2-10S

 User guide:

1, The Two devices for connecting batteries (Marks” 2cells” “3 cells”) could NOT be connected in the same time.

2, To protect charger and batteries, do NOT disconnect the batteries UNTIL charging have been stopped.

3, Lighting indicator : From left to right: the 1st light indicate Li-po battery, the 2nd light indicate Li-fe battery, the 3rd light indicate Ni-CD/ NiMH battery

 

STATE	LED status	indication
POWER	Constantly lighting	Power is connected
CHARGEING	Slowly flash	Battery is on charge
CHARGING	Fast flash	wires for NiCD/NiMH charging   Battery goes wrong
CHARGING	Constanty lighting	Charging is completed

 

 

When charging NiMH/NiCD batteries, pls plug the attached wires for NiMH/NiCD batteries into the “3 cells” device.

4, Switch/choose battery type: Holding/pressing “Batt. TYPE” button, each light indicator will flash 3 times in turn. Loosen the button at the batt. Type which you need  to charge when it’s lighting. 

5, Start/ stop charge: Short Press “start/stop” button.

 

 

Electrical Parameters
Parameters		Min	Typical value	Max	Units
Working voltage		9	12	16	V
Input power		20		25	W
Working temperature		-20		45	°C
Storage temperature		-40		105	°C
Li-po battery	battery cells	2		3	Cell
	Charge current	1300		1500	mA
	Balance current	200		300	mA
	(charging) cutoff voltage	4.19	4.2	4.21	V
Li-Fe battery	battery cells	2		3	Cell
	Charge current	1300		1500	mA
	Balance current	200		300	mA
	(charging)Cutoff voltage	3.59	3.6	3.61	V
Ni-MH/Ni-cd battery	battery cells	2		10	Cell
	Charge current	1300		1500	mA
	Fully charged-V(minus Delta value)(each cell)	10		20	mV

 

 

balance charger